a1. caspian or sti government standard slide $210.00

a2. caspian or sti long slide $270.00

a3. caspian damascus slide $695.00

a4. slide with front [a] scallop(standard) [b] radius or [c] unique/no scallop or radius

a5. any model slide with an external extractor $ 35.00

a6. custom fit slide to frame with minimum of tolerance $175.00

a7. weld frame rails and fit the slide to the frame $225.00

a8. accu-rail system fit of slide to the frame $265.00

a9. lower the ejection port and flare the slide $ 55.00

a10. machine disconnector rail/breech for the marvel disconnector cut [improves reliability] $ 40.00

a11. correct breech face and polish [includes correcting the feeding relief] $ 30.00

a12. marvel disconnector cut and breech face correction [s10 and s11] $ 60.00

a13. cut government slide to commander length $ 60.00

a14. machine commander cut slide for bushing $ 65.00

a15. “bull nose” shape the front of the slide [bull barrel only – includes custom reverse plug] $150.00

a16. browning hi-power style cut on front of the slide $ 75.00

a17. machine for reverse plug [includes reverse plug] $ 50.00

a18. bevel lower edges of slide and correct slides’ edge bevels [standard on all packages] $ 30.00

a19. cocking serrations custom cut into the slide front or rear $ 85.00

a20. cocking serrations custom cut into the slide – both the front and the rear serrations $125.00

a21. “texas border” cut the top edge of the slide where the “round” meets the flat of the slide $ 50.00

a22. border cut both the top edge and the lower edge of the bevel of the slide $ 80.00

a23. stipple the rear of the slide and bevel edges $ 35.00

a24. serrate the rear of the slide and bevel edges [40 lpi] $ 55.00

a25. checker the rear of the slide and bevel edges [40 lpi] $ 90.00

a26. heavy or mild melt of all slide edges/corners $100.00

a27. mill flat on top of slide [approximatey .375” wide] $ 55.00

[there are four “arrow” patterns available 1) arrow 2) broken arrow 3) aztec 4) broken aztec]

a28. mill flat on top of the slide and ‘”arrow” or “aztec pattern the top of the slide $150.00

a29. “arrow” or “aztec” pattern a round top [standard] slide $110.0

a30. broken arrow (2) or broken aztec (4) pattern cut into the top of a round top slide $145.00

a31. marvel pattern cut (seven lines) onto the top of the slide $145.00

a32. stipple the top of the slide and the rear of the slide – border cut the top edge of slide $110.00

a33. stipple the top and rear of the slide – border cut the top edge and lower beveled edge of the slide $145.00

a34. stipple the top of the slide and marvel pattern cut the top- stipple rear and border cut top $160.00

a35. stipple the top of the slide and “deep arrow” pattern the top of the slide $150.00

a36. tri-cut top of slide $150.00

a37. tri-cut top of slide – stipple top flat and border cut top and side edges $190.00

a38. tri-cut top of slide and arrow or aztec line cut the top flat $200.00

a39. tri-cut top of the slide and broken arrow or broken aztec line cut the top flat $240.00

a40. custom “line” cuts on the side of the slide [price may vary according to complexity] $ 65.00

a41. machine slide for reverse plug [includes plug] $ 50.00

a42. standard recoil plug [interior dressed $ 18.00